ZRobo - Meter Reader - Google Play
You'll be able to see results in few seconds.
Publisher Description
Read electricity meters over Bluetooth or USB with REDZ optical probes.
ZRobo reads electricity meters through REDZ optical probes.
It is the companion app for the probes we build and sell at
https://probeformeters.com — designed for them specifically, not a general
purpose terminal. If you have a REDZ optical probe, this is the app that
drives it.
WHAT IT DOES
• Reads meters over IEC 62056-21 mode C and shows every line as it arrives
• Saves each reading as a plain .txt file you can share or export
• Connects three ways: Bluetooth SPP, Bluetooth Low Energy, and USB (OTG)
• Reconnects by itself to the probe you used last
WORKING ON THE PROBE ITSELF
• Device settings: read the probe's full status and write settings back
• Module configuration: 38 Bluetooth module parameters, compared against our
standard values so you can see what differs
• Meter line control: baud rate, framing, break, and the power-on default
• Diagnostics: every row is what the device itself reported, with a note
under each value saying what it means
• Battery level
• Firmware update over the air, with a battery check and a recovery path for
a probe left in its bootloader
WHO IT IS FOR
Field technicians and meter operators working with REDZ optical probes.
It is a tool, not a consumer app: it says what the device reported and does
not guess on your behalf.
REQUIREMENTS
• Android 9 or newer
• A REDZ optical probe (KMK118 or KMK119)
• Bluetooth, or a USB OTG cable for the wired probe
• On Android 9-11, Android requires location permission for Bluetooth
scanning; ZRobo does not collect or transmit location
LANGUAGES
English, Turkish, Italian.
UPGRADING FROM ZRobo 2.x
This installs over the old version as an update. Readings you saved before
are still there.
About ZRobo - Meter Reader
The company that develops ZRobo - Meter Reader is REDZ Smart Communication. The latest version released by its developer is 1.0 .
To install ZRobo - Meter Reader on your Android device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-09-07 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the ZRobo - Meter Reader as malware as malware if the download link to com.REDZelectronics.ZRrobo is broken.
How to install ZRobo - Meter Reader on your Android device:
- Click on the Continue To App button on our website. This will redirect you to Google Play.
- Once the ZRobo - Meter Reader is shown in the Google Play listing of your Android device, you can start its download and installation. Tap on the Install button located below the search bar and to the right of the app icon.
- A pop-up window with the permissions required by ZRobo - Meter Reader will be shown. Click on Accept to continue the process.
- ZRobo - Meter Reader will be downloaded onto your device, displaying a progress. Once the download completes, the installation will start and you'll get a notification after the installation is finished.
Program Details
System requirements
Download information
Pricing
Version History
version
posted on 2026-09-07
ZRobo 3.0.0 is a complete rewrite of the field app.
• Pages instead of one screen: Devices, Read, Settings, Module, Diagnostics, Firmware
• USB (OTG) alongside Bluetooth, and BLE on probes that offer it
• Device settings and 38 module parameters can be read and written
• Firmware update over the air, with battery and recovery safeguards
• Diagnostics, battery level, automatic connection
• Android 12+ Bluetooth permissions; tablet layout
Readings saved by the previous version are kept.
version
posted on 2026-09-07
ZRobo 3.0.0 is a complete rewrite of the field app.
• Pages instead of one screen: Devices, Read, Settings, Module, Diagnostics, Firmware
• USB (OTG) alongside Bluetooth, and BLE on probes that offer it
• Device settings and 38 module parameters can be read and written
• Firmware update over the air, with battery and recovery safeguards
• Diagnostics, battery level, automatic connection
• Android 12+ Bluetooth permissions; tablet layout
Readings saved by the previous version are kept.
version 2.0.3
posted on 2024-03-21
updated to be able to run on latest Android builds.
version 1.2
posted on 2019-05-03
Fixed database settings issue
version 0.7
posted on 2017-11-08
Added serial number of meter in saved txt file name
Fixed layout issue of list of saved files UI
version 0.6
posted on 2016-06-30
- Improved BT connectivity,- Added database to save and restore settings
Disclaimer
Official Google Play Link
We do not host ZRobo - Meter Reader on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for ZRobo - Meter Reader is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
